Match Screen Colors to Thread on the ST-1201 and SC-1501
Overview
With the machine stopped, identify which installed spool feeds each needle you want to update. On Page 3, match the numbered needle swatches to those spools. This walkthrough uses the ST-1201 touchscreen. In the video, needle 1 carries brown thread and needle 2 carries blue thread. Use the colors actually loaded on your machine.
Step-by-step guide
1. Open Page 3 and find the needle swatches
Watch at 00:13On the touchscreen, tap the third tab from the left on the strip between the design area and the controls. The tab turns orange. On the ST-1201 shown, the lower-right panel on Page 3 displays 12 numbered swatches, one for each needle. Read the needle swatches on the right side of this panel. The colored list on the left shows the design’s stitch order.


2. Compare needle 1 with its spool
Watch at 00:24Find swatch 1 at the top left of the needle group. In the demo it is white on the screen, while the spool feeding needle 1 is brown. Use the needle number to identify the spool before you choose a replacement color.


3. Open the color palette
Watch at 00:34Tap the color-change button at the bottom right of the Page 3 panel, just above the blue toolbar. The large color palette opens at the top of the screen. The smaller numbered swatches below it select which needle color to edit.


4. Select needle 1 and choose brown
Watch at 00:49Tap the small swatch numbered 1 below the palette. If you need more shades, tap the right arrow in the left-hand pair directly below the large swatches, as shown. Tap the brown shade that matches the spool. Swatch 1 turns brown. In the demo the selection moves to swatch 2 after the tap, so verify the color on swatch 1 before confirming.




5. Confirm and recheck needle 1
Watch at 00:57Tap the check mark near the bottom of the palette, above the blue toolbar. The palette closes and Page 3 returns. Check that swatch 1 in the right-hand group is now brown and matches the thread feeding needle 1.


6. Compare needle 2 with its spool
Watch at 01:10Check the next mismatched needle. In the demo, swatch 2 is the purple swatch next to swatch 1 on Page 3. The spool feeding needle 2 is blue.


7. Reopen the palette and select needle 2
Watch at 01:22Tap the same color-change button again. Look below the large palette and tap the second small swatch in the top row, labeled 2. Check that the selection is on swatch 2 before choosing a color.



8. Choose blue for needle 2
Watch at 01:36Choose the blue shade that matches the installed thread. In the demo this is the dark blue swatch in the upper grid. Check that swatch 2 changes to blue. The selection outline moves on to swatch 3 in the video.


9. Confirm and compare both saved colors
Watch at 01:40Tap the check mark again. When Page 3 comes back, compare the two numbered swatches with the spools that feed those needles. In the demo the saved swatches show brown for 1 and blue for 2. Use the same sequence for any other swatch that differs from the actual thread.

