Change the Upper Thread on the ST-1501
Overview
Use the tie-on method to guide the new spool's thread along the existing upper thread path.
Step-by-step guide
1. Join the two thread ends
Watch at 00:15With the machine stopped, tie the new thread to the old one with a small knot. Free the old thread from the needle eye.

2. Pull the joined thread through the guides
Watch at 00:32Pull the existing thread until the knot and the new thread have passed through the guides. Then snip the knot away.

3. Hand thread the needle and trim the tail
Watch at 01:20Thread the needle from front to back, tuck the line under the presser bar and trim the excess as shown.
