Troubleshoot Thread Breaks on the ST-1201 and SC-1501
Overview
This SEWTECH TV walkthrough checks the bobbin, needle and upper thread when the thread repeatedly breaks during embroidery.
Step-by-step guide
1. Check the bobbin and perform a drop test
Watch at 00:27Replace an empty bobbin. If the suspended case hardly moves during the test, loosen the larger screw slightly and retest for a smooth 3–5 cm drop.

2. Inspect the needle orientation and condition
Watch at 01:28With the machine stopped, seat the needle all the way up with its long groove forward and scarf back. Replace a worn needle and secure the clamp screw.

3. Check the threading from spool to needle
Watch at 02:24Look for thread trapped at the spool cap, between guides or at the tension discs. Re-seat it along the demonstrated route and pull gently again to check the movement.
