SEWTECHSupport Center 简体中文

Change the Upper Thread on the ST-1501

Applies to ST-1501

Watch on YouTube ↗

Overview

Use the tie-on method to guide the new spool's thread along the existing upper thread path.

Step-by-step guide

1. Join the two thread ends

Watch at 00:15

With the machine stopped, tie the new thread to the old one with a small knot. Free the old thread from the needle eye.

Join the two thread ends
Join the two thread ends

2. Pull the joined thread through the guides

Watch at 00:32

Pull the existing thread until the knot and the new thread have passed through the guides. Then snip the knot away.

Pull the joined thread through the guides
Pull the joined thread through the guides

3. Hand thread the needle and trim the tail

Watch at 01:20

Thread the needle from front to back, tuck the line under the presser bar and trim the excess as shown.

Hand thread the needle and trim the tail
Hand thread the needle and trim the tail