SEWTECHSupport Center 简体中文

Import Machine and Driver Parameters on the ST-1501

Applies to ST-1501

Watch on YouTube ↗

Overview

This service-guided workflow shows the three-option import for an approved machine-specific file.

Step-by-step guide

1. Use the parameter file supplied for the machine

Watch at 00:12

Confirm the parameter file with SEWTECH support, insert the USB drive and open the controller's parameter import screen as shown.

Use the parameter file supplied for the machine
Use the parameter file supplied for the machine

2. Review the three confirmed options

Watch at 00:42

Select the file and review More Set, Frame and Driver Param Load in the confirmation window. Use the three selections shown only for the service-approved full import.

Review the three confirmed options
Review the three confirmed options

3. Confirm completion before removing the USB drive

Watch at 01:11

Wait for Import Success and close the message. Return to the main screen before removing the drive.

Confirm completion before removing the USB drive
Confirm completion before removing the USB drive