Replace a Needle on the ST-1501
Overview
The video demonstrates holding the needle safely while loosening, aligning and securing it in the holder.
Step-by-step guide
1. Loosen the needle screw
Watch at 00:14With the machine stopped, slightly loosen the screw with a flat screwdriver. Remove the broken needle carefully with pliers.

2. Align the replacement needle
Watch at 00:36Position the long groove toward the front and insert the needle into its holder.

3. Check full seating and tighten
Watch at 01:06Push the needle fully to the top of the holder. Check the orientation again and tighten the screw securely.
