SEWTECHSupport Center 简体中文

Lion Embroidery Stitch-Out on the ST-1501

Applies to ST-1501

Watch on YouTube ↗

Overview

Follow the ST-1501 stitch-out of a lion design digitized by GOCA Embroidery. The clip previews the finished design, then shows how the black hoodie is backed and clamped in a green magnetic hoop, how the lion and lettering build up under the needle, and how the embroidery looks out of the hoop.

Video highlights

1. Cut the stabilizer to cover the hoop opening

Watch at 00:02

Unroll the white stabilizer on the table. Use the green hoop as a size reference and cut a sheet with enough overlap for the hoop to grip it all the way around.

Lay the green hoop over the white stabilizer to gauge the sheet size.
Lay the green hoop over the white stabilizer to gauge the sheet size.
Cut outside the hoop edge so the sheet extends past the frame.
Cut outside the hoop edge so the sheet extends past the frame.

2. Set the lower hoop and backing on the station

Watch at 00:05

Set the white perforated hooping board upright on its stand. Place the green lower hoop between the black holders, then lay the cut stabilizer over the opening and smooth it across the frame.

Seat the green lower hoop against the station holders.
Seat the green lower hoop against the station holders.
The stabilizer spans the opening and overlaps the lower hoop edges.
The stabilizer spans the opening and overlaps the lower hoop edges.

3. Lay the hoodie flat and clamp the top hoop

Watch at 00:08

Slip the hoodie over the board so the panel to be embroidered lies flat over the stabilizer. Line up the green top hoop with the lower hoop and let the magnets clamp the panel and backing together. Lift the assembly off the station and check that the fabric is flat inside the opening.

The hoodie covers the board with the embroidery panel facing outward.
The hoodie covers the board with the embroidery panel facing outward.
Align the top hoop with the lower hoop around the area to stitch.
Align the top hoop with the lower hoop around the area to stitch.
Off the board, the black fabric spans the hoop opening without a visible fold.
Off the board, the black fabric spans the hoop opening without a visible fold.

4. Fit the hooped garment under the ST-1501 head

Watch at 00:11

Hold the green hoop at the sides and guide its two metal mounting tabs onto the machine's frame holder. The black embroidery panel sits flat under the needle head while the rest of the hoodie hangs outside the hoop opening.

The operator guides the hoop in by the sides, with the garment hanging down.
The operator guides the hoop in by the sides, with the garment hanging down.
The mounted hoop holds the flat embroidery area under the needle head.
The mounted hoop holds the flat embroidery area under the needle head.

5. Watch the first stitch passes and light fill

Watch at 00:12

Watch the needle at the right side of the head in the first close-up. Sparse light stitches appear on the black fabric. Later cuts show the light fill covering larger areas while the same green frame holds the garment.

The needle lays down sparse light stitches on the black panel.
The needle lays down sparse light stitches on the black panel.
A later shot shows the wider light fill and the first visible mane lines.
A later shot shows the wider light fill and the first visible mane lines.

6. Follow the layered mane and white lettering

Watch at 00:16

The later stitching shots show tan and gold tones building over the light areas and outlining the heart beneath the lion. The camera then moves close to the needle as it adds the white lettering. The clip cuts between stitch stages.

Light and tan threads define the face and mane.
Light and tan threads define the face and mane.
Gold stitching outlines the heart beneath the mane.
Gold stitching outlines the heart beneath the mane.
The needle is adding a white letter above the mane.
The needle is adding a white letter above the mane.

7. Lift the completed stitch-out off the machine

Watch at 00:21

Once the needle is clear of the work in the finished shot, the operator holds the sides and brings the whole hoop forward out of the frame holder. The completed design is shown with the garment still clamped, so you can see the lion, heart and white lettering together.

The operator brings the whole hoop forward, away from the needle head.
The operator brings the whole hoop forward, away from the needle head.
The completed lion, heart and lettering are visible while the garment is still in the frame.
The completed lion, heart and lettering are visible while the garment is still in the frame.

8. Release the magnetic hoop on the table

Watch at 00:26

Lay the hooped hoodie on the table. The operator grips the lower edge of the green frame to separate the magnetic halves. The next shot shows the embroidery out of the hoop.

The hoodie lies flat on the table with the embroidery still in the green hoop.
The hoodie lies flat on the table with the embroidery still in the green hoop.
Hands grip the lower edge of the frame to release the garment.
Hands grip the lower edge of the frame to release the garment.

9. Inspect the face, mane and heart off the hoop

Watch at 00:28

Look for clear facial features, layered mane stitches, a continuous gold heart outline and legible white lettering against the black fabric. The closing shot shows two finished garments with the same motif.

The out-of-hoop close-up shows the gold outline and light fill of the heart.
The out-of-hoop close-up shows the gold outline and light fill of the heart.
The eye and muzzle details stand out from the layered mane.
The eye and muzzle details stand out from the layered mane.
Two finished garments show the lion motif and white lettering together.
Two finished garments show the lion motif and white lettering together.