SEWTECHSupport Center 简体中文

Combine Two Embroidery Designs on the ST-1501

Applies to ST-1501

Watch on YouTube ↗

Overview

Create a new design from two saved patterns by setting their size, orientation and spacing on the controller.

Step-by-step guide

1. Start from the first pattern

Watch at 00:19

Select the first design, note the second design's number and open Create Combined Patterns. Set the first design's orientation or scale if needed.

Start from the first pattern
Start from the first pattern

2. Add the second pattern and set spacing

Watch at 00:57

Enter the second pattern number. Review its orientation, then adjust the X and Y distances to position it relative to the first pattern.

Add the second pattern and set spacing
Add the second pattern and set spacing

3. Save and find the combined design

Watch at 01:27

Confirm the combination and choose a new number and name. Return to the design list and check the saved combined preview.

Save and find the combined design
Save and find the combined design