SEWTECHSupport Center 简体中文

Match Screen Colors to Thread on the ST-1501

Applies to ST-1501

Watch on YouTube ↗

Overview

Sync the 15 numbered color blocks with the spools on the machine so the preview reflects your setup.

Step-by-step guide

1. Compare the color blocks with the spools

Watch at 00:13

Open the color page. Compare the color shown for each numbered needle with the installed thread.

Compare the color blocks with the spools
Compare the color blocks with the spools

2. Select the matching color in the palette

Watch at 00:30

Tap Color Change, select the block, and choose the matching shade. The first example sets needle 1 to white.

Select the matching color in the palette
Select the matching color in the palette

3. Save and recheck the updated colors

Watch at 01:06

Confirm each change. The second example sets block 4 to yellow. Recheck the screen against the real thread before assigning the design colors.

Save and recheck the updated colors
Save and recheck the updated colors