SEWTECHSupport Center 简体中文

Replace a Needle on the ST-1501

Applies to ST-1501

Watch on YouTube ↗

Overview

The video demonstrates holding the needle safely while loosening, aligning and securing it in the holder.

Step-by-step guide

1. Loosen the needle screw

Watch at 00:14

With the machine stopped, slightly loosen the screw with a flat screwdriver. Remove the broken needle carefully with pliers.

Loosen the needle screw
Loosen the needle screw

2. Align the replacement needle

Watch at 00:36

Position the long groove toward the front and insert the needle into its holder.

Align the replacement needle
Align the replacement needle

3. Check full seating and tighten

Watch at 01:06

Push the needle fully to the top of the holder. Check the orientation again and tighten the screw securely.

Check full seating and tighten
Check full seating and tighten