Use the Touchscreen on the ST-1201 and SC-1501
Overview
Use the A15-pro controller to set up a T-shirt, a cap and flat embroidery. The ST-1201 demonstration shows the numbered setup pages in order. Have the design file, threaded needles and the frame or driver for your work ready. The example needle assignments and speeds belong to the jobs shown. Use the links beside the steps to see the exact controls and machine response.
Step-by-step guide
1. Power on and choose a language
Watch at 00:22Turn on the machine and wait for the A15-pro home screen. If this is the first setup, open Settings with the gear at the bottom right. Tap the flags tile, then tap the circle beside your language. The demo selects English. Check the language selection and return to Settings.


2. Set and save the local time
Watch at 00:54In Settings, tap the clock tile in the bottom row. Adjust the time with the controls above and below the numbers. Tap the check mark to save, then back out of Settings to the home screen.


3. T-shirt · Import a design from USB
Watch at 01:20Have the design on a USB drive and the hooped garment ready. Insert the drive into the right side of the controller, then tap the USB icon on the right of the file screen. Select the design thumbnail and tap Import in the USB view. Edit the name in the dialog if needed and tap the check mark. Listen for the confirmation tone, then use Back and check that the design is listed in machine memory. The video uses USB for all three examples and also mentions Wi-Fi as a transfer option.




4. Delete or copy a stored design
Watch at 02:18These are optional file-management actions. On the machine’s file list, select the design you intend to remove, tap Delete and confirm the prompt. Check that its thumbnail disappears. To export, leave the USB drive inserted, select a stored design, tap Copy and confirm with the check mark. Look for “Export Pattern Finished!” before returning to the list.



5. Page 2 · Set the design direction
Watch at 02:56Select the design you will stitch in the machine’s list. Tap the second tab in the horizontal strip below the preview. Tap P in the Direction row to change the orientation. The cherry preview turns from horizontal to vertical in the demo. Tap P again if you need to return to the original direction, and check the preview against the way the garment is hooped.


6. Page 2 · Adjust angle and scale
Watch at 03:23Tap Angle, enter the value on the number pad and confirm. The demo enters 20° to show the rotation, then puts it back to 0°. Use the X and Y scale fields to resize along each axis. The video illustrates increasing a scale value from 100 to 120. Check the resulting preview and size before continuing to Page 3.



7. Page 3 · Match the screen colors to the spools
Watch at 04:04The numbered swatches represent the controller’s needle positions. Compare each swatch with the thread actually installed at that needle. In the demo, needle 8 is threaded green but displays purple. Tap swatch 8, choose green in the palette and tap the check mark. Check the updated swatch and preview before assigning the stitch order.


8. Page 3 · Assign the T-shirt color sequence
Watch at 04:55Use the stitch-order rows on the left and the numbered needle swatches on the right. The cherry example uses needle 8 (green), 12 (red), 10 (black) and 1 (white), in that order. Choose needles to suit your own design and thread setup, then check both the sequence and the rendered colors.


9. Page 4 · Match the T-shirt hoop and position the design
Watch at 05:14Open Page 4 and tap the hoop selector above the small control buttons on the left. In the grid, choose the entry that matches the hoop physically fitted to the machine and tap the check mark. Check the hoop outline in the preview. Use the arrow pad on the right to move the design. Rabbit gives faster travel and turtle gives finer movement. Use the center command and confirm its prompt if you want to return to the frame center.



10. Page 4 · Trace the T-shirt design
Watch at 06:05Tap Trace in the left control group. Watch the red laser dot mark the design’s outer limits on the hooped shirt. Check every edge for clearance inside the actual hoop. If the path is too close to the frame, adjust the placement and trace again before stitching.


11. Page 5 · Choose color-change mode and speed
Watch at 06:23Open Page 5. The needle icon marked A in the left-side control group indicates Automatic in the demo. The ST-1201 demonstration describes three color-change modes. Automatic continues through the sequence. Semi-automatic changes to the next needle and waits for you to press Start. Manual stops after each color and waits for you to select the next needle. Use the speed down/up controls in the lower left to set the speed for your work.


12. Confirm and start the T-shirt design
Watch at 07:10After checking the file, color order, frame and trace, tap the embroidery confirmation control at the right end of the tab strip. Wait for the design to load and reappear in the preview. Press the physical Start button with the blue ring below the screen. Watch the first stitches to confirm the selected design starts in the traced area.



13. Cap · Prepare the driver and select cap mode
Watch at 07:34With the machine off, make sure the cap driver is installed correctly. Power on and open the frame selector on Page 4. The demo selects CAP FRAME 270×70 in the second row on the right. Tap the check mark at the bottom. The controller warns that the carriage may move. Check the setup and clearance before confirming the prompt. When the narrow cap-frame outline appears, fit the hooped cap onto the driver.




14. Cap · Import the design and check direction
Watch at 08:05Insert the USB drive, tap USB, select the cap design and use Import. After confirmation, return to the machine list and select the imported design. On Page 2, check the artwork direction before moving on to colors. The automatic cap-mode rotation is shown later, after embroidery confirmation.


15. Cap · Assign the two colors
Watch at 08:30Open Page 3 and compare the numbered swatches with the threads on the needles. The ST lettering example assigns red to the first stitch color and blue to the second. Select the respective needle swatch for each color step. Check that S turns red and T turns blue in the preview.


16. Cap · Position the design in the cap frame
Watch at 09:00Open Page 4 and check that the cap outline is displayed. Use the arrows to move the design, the turtle setting for fine moves and the rabbit setting for faster moves. If you choose to center the design, use the center function and accept its confirmation prompt.


17. Cap · Trace using the physical needle position
Watch at 09:21Run Trace on Page 4 and watch the actual needle position relative to the cap and frame at the boundary. The red laser spot seen on the curved cap is unreliable for this check. Start only after the needle path is clear of the cap frame. Reposition and retrace if you need to change the placement.


18. Cap · Set speed, confirm rotation and start
Watch at 09:38On Page 5, use the speed controls. The video recommends 600–700 stitches per minute for the cap example and sets 650. Confirm the embroidery and wait for the preview. The controller automatically turns the ST design 180° for the cap setup shown. Check the orientation, then press the blue-ring physical Start button and watch the first stitches.



19. Flat embroidery · Fit the hoop and load the design
Watch at 10:23Make sure the flat hoop is installed with the material held flat. Insert the USB drive, open its file list, choose the design, tap Import and confirm. Return to the machine list and check that the imported design is available. Select it, open Page 2, and use P if the design needs reorienting. Check the flower preview against the material before going to Page 3.



20. Flat embroidery · Check the two needle assignments
Watch at 11:11On Page 3, match the needle swatches to the actual thread colors. The flower example assigns needle 8 to the first color and needle 11 to the second. Check that the color-order display and the flower preview both update before opening the hoop page.


21. Flat embroidery · Select the frame and place the design
Watch at 11:55On Page 4, open the frame selector. The video chooses the large rectangular frame because it matches the one already installed. Choose your matching frame and tap the check mark. Use the arrows to place the flower inside the green outline. Use turtle for fine moves or rabbit for faster travel, or run the center command to position it in the middle.


22. Flat embroidery · Verify clearance with Trace
Watch at 12:35Tap Trace. Watch the red laser dot on the flat material as the machine follows the outside of the design area. Verify the entire path fits inside the actual frame, then check the design position against the green outline on the screen. If you adjust the position, trace again before moving to Page 5.


23. Flat embroidery · Set speed, confirm and start
Watch at 12:58On Page 5, the demo uses Automatic color change and sets 800 stitches per minute as its flat-work example. Adjust the speed and tap the embroidery confirmation control at the right end of the tab strip. Wait for the flower design to reappear, then press the blue-ring Start button. Watch that the machine begins at the intended spot.



