Sew Tech MaggieFrame Magnetic Hoop 100x100mm | 3.9" for Bolton Tools
No se pudo cargar la disponibilidad para recoger
¡Eres bienvenido a compartirlo en las redes sociales!
Example picture below:
Descripción
Hooping Revolution - Magic of MaggieFrame Magnetic Hoop
Packing List:
- Embroidery Hoop Main Part (Without Brackets) x 1
- A Pair of Brackets x 1
- Screws
Note:
- This hoop inside dimension is 100x100mm / 3.9"x3.9".
- The actual embroidery area will be smaller by 15mm / 0.6″. (depending on the brand of machine)
- The brackets for you vary according to your machine brand and hoop length selection.
- Brackets need to be assembled with the screws.
Compatible With Bolton Tools Embroidery Machines, but not limited to:
- CTF1501
- CTF1502
MaggieFrame V.S. Mighty Hoop:
1. MaggieFrame is easier to use and saves time than Mighty Hoop.
2. MaggieFrame's magnetic strength is about 5% higher than Mighty Hoop.
3. MaggieFrame is 40 times more durable than Mighty Hoop.
Product Features：
1. Hold Fabric Firmly
The MaggieFrame contains embroidery hoop magnets and has a large grain-textured contact surface, both of which assist in holding the fabric securely and ensuring even tension.
2. Automatic and Fast Hooping
Using magnetic hoops, clamp fabrics of different thicknesses automatically and quickly. Say goodbye to traditional hoops and the time-consuming, laborious manual tightening and adjusting of screws!
3. Perfect for Both Thin and Thick Fabric
With MaggieFrame magnetic hoops for Bolton Tools embroidery machines, thin, thick, or uneven fabrics, such as jackets, sweatshirts, Hoodie, jeans, backpack, towel, left chest logo, right chest logo, pocket can be fixed in place reliably.
Product Videos:
Through these videos, you will get practical tips on using MaggieFrame magnetic hoop.
17+hoop sizes: 3.9×3.9″/100x100mm ~ 17×15.5″/430x390mm meet all your needs.
